|
|
 |
|
TIME Group Inc. has developed more than 9 series of testing instruments including ultrasonic flaw detector, surface roughness tester, portable hardness tester, vibrtaion pen, rockwell hardness tester, shore hardness tester, coating thickness gauge, vibration gauge, x-ray flaw detector, ultrasonic thickness gauge, digital readout and infrared thermometer. As well as 8 series of IGBT inverter welding machines including DC manual arc welding power source, TIG/MMA arc welding power source, TIG/MMA pulse welding power source, AC/DC pulse TIG/MMA square wave welding power source, air plasma arc cutting machine, semi-automatic gas shielded metal-arc welding machine(CO2/MAG/MIG), automatic submerged arc welding machine, inner shielded welding machine, etc.
|
|
| | Vibration Pen, Vibration Meter, Vibration Instruments Item Code: Tv200-220-260 We offer vibration pen which is quick checking of unbalance, misalignment, bearings and gears. The product details are as under : Prompt testing of vibration on the workshop machines. For quick checking of unbalance misalignment, bearings and gears Guard against mechanical malfunction Holding tested value for 40 seconds Automatic switch off after 40 seconds TV200 is used specially for velocity testing TV220 is used specially for displacement testing TV260 is used for testing of acceleration, velocity and displacement http://www.timegroup.com/ebusiness/EN/product_detail.asp?catalogid=2&productid=167
|
Portable Hardness Tester  Portable Hardness Tester, Hardeness Tester, Material Hardness Tester. We offer portable hardness tester fro making hardness measurement. The product details are as under : - Impact Device D integrated: no cables
- Wide measuring range in HLD and direct display of converted hardness values in HB, HRB, HRC, HV, HS
- For most metals (see table below)
- Test at any angle
- Simple handling and low test expenditure
- Optional printer TA220S available
Other Information - Pay Mode Terms: T/T (Bank Transfer)
| |
| | Surface Roughness Tester Item Code: Tr300 We supply surface roughness tester. It measures the roughness, waveness and primary profile with a wide measuring range. The product information is as under: Equipped with 55 kinds of roughness parameters that conform to ISO/DIN/ ANSI/JIS standards. Measurement of roughness, waveness and primary profile with a wide measuring range. Integrated design for convenient using. LCD, digital/graphic display. Skidded / skidless pickup makes it so efficient to evaluate curved surface roughness. Equipped with advanced Windows software. Outputting of data to PC by using RS232 or USB cable is available as well as printing out by printer. Technical Specification: Items Description Assessed profile R (Roughness), W (Waveness), P (Primary profile) Measuring Range 800m, 80m, 8m Filtering RC,PCRC,Gauss Evaluation Parameters R: Ra,Rp,Rv,Rt,Rz,Rq,Rsk,Rku,Rc,RS,RSm, Rlo,RHSC,Rpc,Rmr(c),RzJIS,R3y,R3z W: Wa,Wp,Wv,Wt,Wz,Wq,Wsk,Wku,Wc,WS,WSm, Wlo,WHSC,Wpc,Wmr(c),WzJIS P: Pa,Pp,Pv,Pt,Pz,Pq,Psk,Pku,Pc,PS,PSm, Plo,PHSC,Ppc,Pmr(c),PzJIS Rk: Rk,Rpk,Rvk,Mr1£¬Mr2 Cutoff length 0.08mm,0.25mm,0.8mm,2.5mm,8mm Max. driving length 40mm Analysis graphs ADC, BAC Evaluation length 1L-5L Resolution 0.0001m/8m Display LCD Memory 10 groups of primary data Data output RS232,USB Power supply Li battery / AC adapter Dimensions 409x96x98(mm) Weight 2.3Kg Standard Delivery: Main unit Pickup Swallow-tailed support Specimen Ra Screwdriver Protection nose Optional accessories: Printer TA220S Communication cable PC software (TIMESurf for TR300) TIMESurf for TR300software works for TIME advanced surface roughness tester TR300 managing, analyzing, printing and searching measured data and graphs Operator is allowed to perform evaluation of mean value, max. value, min. value, standard deviation and variance by moving mouse. And the calculation results can be stored in a default Excel file or in a Excel file specified by user. Equipped with powerful data management function.
|
Ultrasonic Flaw Detector Item Code: Tud300 Product info: Measuring of pitch interval and analyze of echo times; Two input methods: angles and K value. Auto-calibration of probe and auto-gain. Two measuring unit: mm/inch; All built-in software can be up-graded on PC; Lock/unlock the system parameters; Equipped with gate setting and alarming function. Two measurement displaying mode: type A and type B; Freeze/defreeze waveform and detection parameters; Communicating with PC by RS232 port for transferring the measuring data and system parameters; 10 detecting channels are available with a separate detecting parameter and DAC curve in every channel. Automatic generation of DAC curve, and 30 points can be recorded at most, adjustable offset curves and gain correction functions are available. Provided with linear suppressing function, the highest suppressing is 80% of the screen height; Memory up to 300 A scanned images, parameters and DAC, and 30000 thickness values. Four Rectify Ways: positive half-wave, negative half-wave, full wave and radio frequency. Three detecting modes: single-probe , dual-probe ones and transmission; Technical Specification: Items Description Scanning Range 2.5 mm ~5000 mm Scanning Resolution 0.1mm (2.5mm ~100mm) 1mm (100 mm ~5000mm) Gain Range 0dB ~110 dB D-Delay -20s~+3400s P-Delay 0s~99.99s£¬resolution 0.01s Sound speed 1000 m/s~9999m/s Bandwidth 0.2MHz~15MHz(Low0.2~1,Mid.0.5~4, High 3~15) Vertical linearity error 3% Horizontal linearity error 0.2% Dynamic range 32dB Rectification Positive half wave, negative wave, full wave, and RF Sensitivity leavings 60dB Test mode Pulse-echo, dual and through transmission Pulser Spike excitation pulser Damping 50ohms, 150ohms and 400ohms Reject Linear, 0-80% of full screen, variable in steps of 1% Unit Metric/inch Interface RS232 Printer TP UP-NH-S line thermal printer AC requirements 85-264V AC/1.0A,47-63Hz Temperature -10~40
| |
| 
| Torque Driver SRT Torque Driver is applied in fasten pieces which have torque request, it can fasten the fastener according to pre-set torque driver. The products have bidirectional load, may pre-set the torque value, if surpasses the setting value, the driver will be idling, it can control the dynamics of thread effectively. Other Information |
Belt Tension Tester Model: BTT-2880 Application: Main used in belt tension measurement, can also be applied to measure the tension of objects such as tapes, wires. Widely applied in industries of automobile, textile, cables, wires, plastic films, paper, printing. Measuring range:
0-750N
0-120lb
0-77Kg
0-114Seems Accuracy: ≤±5% Belt state indication: Low, OK, Hi Resolution: ±1N (or1 least significant digit of other units) Belt width: ≤36mm Overload alarm: 750N Max. load: 850N Metric/Imperial Auto power off Pc interface: RS-232C Power supply: 4×1.5V AAA(UM-4) Operating condition: 0 ~ 50ºC, < 85% RH Dimension: 135×62×33mm (5.3×2.4×1.3inch) Net weight: 335g(not including batteries) Optional Accessories: Cable and Software for RS-232 and |
|
|
| Wet Film Thickness Gauge Tricomb Stainless Tricomb Stainless Steel Wet Film Gauges are precision machined, ensuring the highest accuracy of wet film thickness measurement is obtained. Wide measurement range with high resolution measurement, catering for virtually all of the standard wet film measurement requirements. Easy to use, place the Tricomb into the paint so it touches the substrate. Then remove the Tricomb. The coating thickness can now be observed by looking at the teeth. All gauges have dual Micron and Thou / Mil scales. Manufactured in stainless steel, allowing the gauge to be hard wearing and easily cleaned in solvents. |
Gloss Meter Stargloss Gloss and Haze measurement is essential where an aesthetic appearance of the coating finish is required and to ensure uniformity of the surface finish. The gloss value is determined by directing a light, which has a similar wavelength to the human eye, at the test surface and measuring the amount of specular reflection. Gloss is measured with angles of 60° and 20°. The 60° angle is universal for all applications. The 20° angle gives improved differentiation of measurement on high-gloss coatings above 70 gloss units. Haze measurement is required where high-gloss surfaces have a low reflection contrast. The Haze measurement is the difference between readings taken with the 20° and 60° angles, complying with International Standard ASTM D4039. The Stargloss will automatically calculate the Haze reading. The Haze function is only available on combined 60°/20° models. Small and portable, the Stargloss is one of the most advanced Gloss Meters available. By using tungsten halogen lamps and optical filters the light source has a similar spectro-response to the human eye, giving true human photo-optic performance, which is essential for ensuring exact compliance to International Standards. Optical bench accuracy and stability are obtained by the optics being set in a precision-engineered aluminium block. Available in models of Standard and Top. All functions are easily accessible through a menu-driven back-lit display. |
|
|
| DC Holiday Tester, Holiday Tester, Holiday meter Holitech The Holitech is a DC Holiday Tester that tests and detects pinholes and flaws in insulated coatings on conductive substrates. Where coatings have to provide an effective safeguard against corrosion, it is essential that any pinholes or flaws that will eventually lead to corrosion are detected at the earliest possible stage, preferably immediately after the coating application. Operation is by a test voltage being applied to the coating by moving a brush electrode across the surface and where there is either a pinhole or flaw, the voltage will spark through the coating, a red indicator will flash and an audible alarm will sound. The detected flaw can be marked for subsequent repair, and testing resumed for the remaining surface area. The Holitech is a compact and lightweight instrument, which can easily be carried by the operator with the supplied Neck Strap. The test voltage is of high impedance, allowing for safe testing, and does not damage or cause burn marks to the coating. Calibration Certificates are available with traceability to UKAS. |
Surface Profile Gauge Surface Profile Gauge, Surface Profile, Surface Profile Comparator, Profile Gauge
Surface Profile Gauge The Surface Profile Gauge allows the peak-to-valley height of a blast-cleaned surface to be accurately measured in accordance with the ASTM D4417 Standard. A simple-to-use Surface Profile Gauge, offering a high resolution of 1μm (0.1mils). The blasted profile is measured very quickly and with a high degree of accuracy by operating the instrument as follows: Place the Profile Gauge on the glass plate and zero the instrument. Now place the gauge on the blasted profile. The foot sits on top of the peaks and the sharp stylus travels to the bottom of the valleys allowing the gauge to display the
peak-to-valley height . In addition to blasted profile evaluation, this gauge can also be used for pitting and cavity depths caused by corrosion. Readings are switchable between metric and imperial. Calibration Certificates having traceability to UKAS are available. Supplied in a foam-filled Carrying Case with Glass Zero Disk. |
|
|
| Concrete Thickness Tester Concrete Thickness Tester, Concrete Thickness Gauge, Concrete Meter TC100/110 is used to detect the thickness of concrete covering layer and rebar diameter. Besides, it can detect the location of magnetic substance and electric conductor in non-magnetic and non-conductive medium, E. G. cable inside wall body and water & heating pipe etc. it is a kind of intelligent nondestructive test equipment possessing the functions of automatic detection, data memory and output. |
Crack Depth Gauge, Crack Depth Meter, Crack Meter TC200 is used to measure concrete crack depth by applying principle of acoustic diffraction. It also can be used to measure propagation velocity of ultrasonic wave in concrete. This instrument is a kind of intelligent nondestructive test equipment possessing the functions of automatic detection, data memory and output. Other Information - Pay Mode Terms: T/T (Bank Transfer)
|
|
|
| Yarn Speed Meter, yarn Speed testing Meter, Yarn Meter YSL-2000HDMulti-function Yarn Speed & Length Meter The CHECK-LINE YSL-2000HD combines the functions of three separate instruments in one, easy-to-use device. It accurately measures the speed and length of yarns, and other filaments using a unique "wrapper" roller. This precision roller directs the filament onto the low-inertia, U-grooved measuring wheel to maximize contact and eliminate filament slip and breakage. The YSL-2000HD can also be used as either a contact or non-contact tachometer to measure rotational speeds of shafts, motors, pulleys, etc. or linear speeds of moving surfaces such as conveyor belts, webs of paper or fabric, etc. |
|
© Navtek Instruments (India) Private Limited. All Rights Reserved (Terms of Use)